|
Model No. |
Features |
Topr
(°C) |
Operating
supply
voltage
(V) |
Electro-optical characteristics |
Dissipation
current
(mA) |
Detection concentration
µg/m3 (TYP.) |
Sensitivity |
Output |
|
GP2Y1010AU0F |
•Built-in infrared emitting diode,
photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Analog voltage |
–10
to +65 |
4.5 to 5.5 |
TYP. 11 |
0 to 600 |
0.5±0.15 V/
(0.1 mg/m3)
Precision ±30% |
Analog
voltage |
|
GP2Y1014AU0F |
•High sensitivity
•Built-in infrared
emitting diode,
photodiode and signal
processing circuit
•Compact, single-shot
detection of house dust
•Output: Analog
voltage |
4.5 to 5.5 |
TYP. 11 |
0 to 240 |
0.5±0.075 V/
(0.1 mg/m3)
Precision ±15% |
Analog
voltage |
|
GP2Y1023AU0F |
•High sensitivity
•Built-in microcomputer
•Built-in infrared emitting diode,
photodiode and signal processing circuit
•Compact, single-shot detection of house dust
•Output: Digital signal output (PWM) |
4.75 to 5.25 |
TYP. 15 |
0 to 240 |
1.4±0.21 ms/
(0.1 mg/m3)
Precision ±15% |
Digital signal (PWM)
Temperature correction
Averaging |
|
GP2Y1026AU0F |
•High sensitivity
•Built-in LED pulse drive
circuit
•Built-in microcomputer,
Dust
conventration is converted to Uart
signal
output. No need for offset correction
nor
averaging in set
•Built-in Temperature
Correction |
4.75 to 5.25 |
TYP. 15 |
0 to 1000 |
0.35±0.06 V/
(0.1 mg/m3)
Precision ±15% |
Digital signal (UART)
Temperature
correction
Averaging |
|
★GP2Y1030AU0F |
•Built-in infrared emitting diode,
photodiode and signal processing circuit
•Built-in microcomputer
•Sensing can
discriminate between PM2.5 and PM10
•Internal cleaning possible |
3 to 5.5 |
TYP. 25 |
0 to 500 |
Precision
±15% |
Digital
signal (UART) |
|
|
|
|
|
|
|
|
|
※Notice
In the absence of confirmation by
device specification sheets, SHARP takes no
responsibility for any defects that may occur
in equipment using any SHARP devices shown in
catalogs, data books, etc. Except where
specially indicated, models listed on this
page comply with the RoHS Directive*. For
details, please contact SHARP.
*RoHS
Directive: Prohibits use of lead, cadmium,
hexavalent chromium, mercury and specific
brominated flame retardants (PBBs and PBDEs),
with certain exceptions.
Contact SHARP in
order to obtain the latest device
specification sheets before using any SHARP
device. |
